16 Millimeter to Inch
Convert 16 (sixteen) Millimeters to Inches (mm to in) with our conversion calculator.
16 Millimeters to Inches equals 0.6299 in.
To calculate 16 mm to inches, we use the conversion factor that 1 inch equals 25.4 millimeters. The calculation process involves dividing the length in millimeters by the conversion factor to convert it into inches. Therefore, the calculation is as follows: 16 mm divided by 25.4 mm/inch.
\([ \text{Conversion to inches} = 16 \text{ mm} \div 25.4 \text{ mm/inch} \approx 0.62992 \text{ inches} ]\)
The calculation shows that 16 mm is approximately equal to 0.63 inches (rounded to two decimal places for simplicity). This conversion is used in various measurements to translate metric units into imperial units, which are more commonly used in the United States and a few other places around the world. Understanding this conversion is fundamental in fields that require precise measurements, including engineering, manufacturing, and construction. Knowing how to convert millimeters to inches allows for easier communication of small scale measurements in a format that is familiar to those who utilize the imperial system.
Here are 7 items that are approximately 16 mm in length:

A standard pencil's diameter:

Pencils vary slightly in diameter, but an average wooden pencil is about 16 mm wide.

Diameter of a small button:

The kind used on shirts or children's clothing can be around 16 mm.

Width of a USB TypeA connector:

The metal part that plugs into the USB port is close to 16 mm wide.

Thickness of 16 stacked CD cases:

Each CD case is roughly 1 mm thick, so 16 stacked would be close to 16 mm.

A small marble:

Marbles can vary, but small ones are often close to 16 mm in diameter.

The short side of a standard staple:

The side that gets crimped down can be approximately 16 mm in length.

Thickness of a smartphone screen protector (for several stacked):

Depending on the protector, stacking around 10 to 20 could total 16 mm in thickness.
